Stingray Energy 3.1m

from 1,749.00 €

incl. VAT, plus delivery
Delivery time: 3 day(s)


Please first select the variant above to see the exact price.

Stingray Energy

  • Full carbon wing
  • Large aramid-reinforced carbon fuselage
  • Cockpit glued and painted
  • Finished wiring harness for fuselage and wings
  • massive wing joiner made of carbon
  • Elevator connector made of steel


Magnetic elevator lock the Stingray Energy is uncompromisingly designed for speed and crisp aerobatics. Due to the large surface depth, it also cuts a good figure in thermals. The whole thing is complemented by indestructibility in the air and even on hard landings the Stingray just smiles tiredly.

It follows all control commands with absolute precision and performs all aerobatic maneuvers as if pulled on a string.

The Stingray remains uncritical at all times and can be landed precisely thanks to the butterfly programming.

The pack size is only 1.8 m.


  • Glider
  • Electro (FES) with scale spinner and white propeller
  • Impeller (EDF)


  • Standard Kit: All standard parts incl. wiring harness
  • Full Build Kit (Glider): Standard kit + servo set, battery and magnetic switch
  • Full Build Kit (Electro): Standard kit + servo set, impeller, controller and motor-battery
  • Full Build Kit (Impeller): Standard Kit + servo set + mechanical retraction+ EDF + controller + battery
  • Read To Fly: Full Build Kit + complete assembly of the aircraft by us within a few days!
  • Premium Read To Fly: Full Build Kit + complete assembly of the aircraft by us within a few days! + high quality bags for all parts


  • Easy to build..........⭐⭐⭐
  • Easy to set up........⭐⭐⭐
  • Easy to fly..............⭐⭐⭐⭐
  • Speed.................... ⭐⭐⭐⭐⭐
  • Thermal................. ⭐⭐⭐
  • Agility..................... ⭐⭐⭐⭐⭐

Technical data:

  • Wingspan: 3100 mm
  • Wing area: 72 dm²
  • Center of gravity: 110 mm
  • Flight weight: 7600 gr
  • Airfoil: RG15 mod.


  • Elevator
  • Rudder
  • Ailerons
  • Flaps

Wings and tailplane:

  • High strength gel-coat carbon wings in sandwich build
  • Clean, high quality processing
  • green painted in the mould (white stripes on bottom side of the wings)


  • High strength gelcoat carbon/aramid fuselage
  • Clean, high quality processing
  • Painted green in the mould
  • Clean Canopy, glued and painted

Accessories included:

  • Glass canopy glued and painted
  • servo covers Servo support plate (fuselage)
  • High quality clevis ⭐
  • Pre-assembled and encapsulated wiring harness ⭐

Further recommended accessories:

  • Fitting servo set (available here in the shop) ⭐
  • Magnetic switch (available here in the shop) ⭐

Rudder Setup:

  • Elevator: 20 mm up / down
  • Rudder: 35 mm left / right
  • Aileron: 16 mm up, 12 mm down
  • Flaps: 8 mm down, 6 mm up


  • Aileron: 10 mm up
  • Flaps: full down
  • Elevator: 6 mm down

(All mm data measured at the position of the largest deflection of the rudder)

Servo recommendation:

  • Elevator: KST DS725MG
  • Rudder: KST DS725MG
  • Aileron: 2x KST X10
  • Flaps: 2x KST A12-T
  • Note our low-priced servo sets in the accessories area! ⭐

Information about motorization:

  • Motor: Hacker A50-12L Turnado V4 kv450
  • Controller: Hacker SB70pro
  • Battery: Hacker Eco-X 6S 5000mah
  • Propeller: Scale Folding Propeller 14x8
  • Spinner: Propeller Scale Spinner


  • Impeller: MigFlight JETEC E-80 Impeller 10-12S
  • Motor: Leomotion 1300kv
  • Controller: Hacker MasterSPIN 170 Opto
  • Battery: 2x Hacker TF Power-X 5000-6S MTAG

More Ressources:

☎ +49 2405 4063763