Spada 3.0 m
from 1,899.00 €
Description
Please first select the exact variant above to see the exact price.
Spada GoFast Racer 3.0 m
- Worldwide door-to-door shipping
- Completely assembled (ARF) or ready to fly (RTF)
- Full carbon wing and tail wing
- Aeroic sinus spar
- Full carbon / aramid fuselage with 2.4 Ghz-friendly nose
- Large aramid-reinforced fuselage
- Ready-made wiring harness for fuselage and wings
- Pre-installed control horns on the wing
- Extremely light - Extremely strong
References:
- Spada - F3F Competition Riesling Cup
- Red Jensen - Maiden Flight
- Spada GoFast Racer 3.0m - 130m Bungee Launch
- Spada GoFast Racer 3.0m - Windy day without ballast
- Spada GoFast Racer 3.0m - Onboard Bungee Launch
The Spada was designed as the successor to the Redshift and has been further developed with increasing experience.
The Spada GoFast Racer was designed taking into account the good feedback from the top pilots who flew the original glider.
It is a sleeker, lighter and stronger version of the Redshift - but is so much more than just a race plane. With further improvements over the original design, such as harder layups and a double sine wave spar as standard, the model has been made even more robust.
The test flights were conducted in the USA by Aeroic test pilot Red Jensen and in Germany by Composite RC Gliders: The model really lives up to its GoFast designation.
It is faster overall, accelerates instantly, turns tighter and has greater energy conservation potential than any other model ever developed by Aeroic. In short, it is a thoroughbred racing airplane. With its optimized Optimum Lift Distribution (OLD) wing shape and low drag, responsive wing, the Spada is a real stunner.
Built to withstand the rigors of daily use on slopes and in competition. De Spada is fast, agile and easy to fly. No bad habits and very stable to fly with flaps and therefore extremely easy to land.
The pack size is only 1.5 m.
Version:
- Glider
Build:
- Standard Kit:
- All standard parts
- Wiring harness
- Full Build Kit (Glider):
- All standard parts
- Wiring harness
- Servo Set
- Battery
- Magnetic Switch
- Ready To Fly:
- Complete assembly of the aircraft by us within a few days!
- Read To Fly Premium:
- Complete assembly of the aircraft by us within a few days!
- High quality bag(s) for all parts from Revoc
Classification:
- Easy to build..........⭐⭐⭐⭐⭐
- Easy to set up........⭐⭐⭐⭐⭐
- Easy to fly...............⭐⭐⭐
- Speed..................... ⭐⭐⭐⭐⭐
- Thermal................. ⭐⭐⭐
- Agility..................... ⭐⭐⭐⭐⭐
- Strength.................⭐⭐⭐⭐⭐
Technical data:
- Wingspan: 3.000 mm (118″)
- Wing area: 43 dm²
- Center of gravity: 100 mm
- Flight weight: 2.300 gr (5,1 lbs)
- Airfoil: JH2580, JH2575, JH2570
Controls:
- Elevator
- Rudder
- Ailerons
- Flaps
Wings and tailplane:
- High strength gel-coat carbon wings in sandwich build
- Clean, high quality processing
- Painted in the mould
Fuselage:
- High strength gelcoat glass/carbon/aramid fuselage
- Clean, high quality processing
- Painted in the mould
Accessories included:
- Glass servo covers Servo support plate (fuselage)
- High quality clevis made of spring steel ⭐
- Pre-assembled and encapsulated wiring harness ⭐
Further recommended accessories:
- Fitting servo set (available here in the shop) ⭐
- Magnetic switch (available here in the shop) ⭐
Servo recommendation:
- V-Tail: 2x KST X12-508
- Aileron: 2x KST X10
- Flaps: 2x KST X10
- Note our low-priced servo sets in the accessories area! ⭐
Rudder Setup:
- V-Tail: 8 mm up / down
- Aileron: 10 mm up, 8 mm down
- Flaps: 3mm down, 2 mm up
Butterfly/Landing:
- Ailerons: 6mm up
- Flaps: Full down
(All mm data measured at the position of the largest deflection of the rudder)
Building description:
You can find our current build times for RTF models: <Click Here>
More Ressources:
✉ info@composite-rc-gliders.com
☎ +49 2405 4067752 (german / english)
Whatsapp: +49 152 31700200 (german / english)