PowerBEAST Basic Programming Card
10.00 €
incl. VAT, plus delivery
Can be ordered
Delivery time: 3 day(s)Description
PowerBEAST Basic Programming Card
- Cut off power: Reduce / Stop
- Max Speed: Low /Medium / High
- Brake: Off / 20% / 50% /100%
- Start: Normal / Soft
- Work Frequency: 8 kHz / 16 kHz
- Battery: Ni-Mh, Ni-Cd / LiPi, LiIo, LiFe
- Rotation: Forward / Reverse
- Cut Off Voltage: 3.0V / 3.2V
- Heli Mode: On / Off
- Timing: Fixed 8° / Fixed 16° / Auto / Low 0-7° / Medium 8-15° / High 16-25°
Programming the card:
- Set all jumpers on the programming card as desired
- Connect the motor to the PowerBEAST controller
- Connect the controller cable of the PowerBEAST to the "Signal Wire" connection
- Connect the drive battery to the PowerBEAST controller
- A short "beep" signals that programming is complete
(A 10 second "Beep" indicates an error. Then please repeat everything)
An input voltage of 5.0 - 8.4V can be used.