Orlik-II 5.0 / 6.0 m

from 4,199.00 €

incl. VAT, plus delivery
Delivery time: 30 day(s)


Please first select the exact variant above to see the exact price.

Orlik-II 5.0/6.0 m

  • Fully assembled (ARF) or ready to fly (RTF)
  • You get exactly what you see in the pictures
  • Premium glider pilot available as an accessory
  • Completely built in balsa and pine
  • Glued with high quality adhesives
  • Hull painted gray inside
  • Covered with Oratex
  • Covering trimmed with pinking scissors
  • White and red paint (rolled) already applied - as shown in the photos
  • All labels already applied
  • Chassis included
  • Cockpit fully assembled, screwed and painted
  • Cockpit lock already installed
  • Instrument panels already installed
  • Finished wiring harness for fuselage and wings


Kocjan designed the Orlik family of gliders in the late 1930s. The original Orlik had a wingspan of 14.4 m, the Orlik 2 had a wingspan of 15.4 m (50.5 ft) and a glide ratio of 26.5: 1.

An Orlik 2 was exhibited at the 1939 New York World's Fair. After the fair, it was bought by a private buyer and then confiscated by the US government and put into military service as a training glider called the XTG-7. After the end of World War II, it was sold as surplus and was overtaken by Clarence See. It was then bought by Paul MacCready, who flew it in the US Nationals in 1948 and 1949 and won both competitions. MacCready also used the aircraft to set a world altitude record of 9,000 m (29,528 ft) in 1948 when he was flying in the Sierra mountain wave.

Our model has a very good-natured flight behavior. The rudders respond excellently to the smallest control commands, which makes centering in thermals child's play.

Extended thermal flights over a large area are absolutely uncomplicated to master with this model. Due to the good cross-country flight performance of the model, downdraft fields can be flown through quickly and without great loss of altitude.

The ease of handling on the landing approach is second to none.

The pack size is only 1.87 / 2.25 m.


  • Glider
  • Electro (FES) with scale spinner and white propeller


  • Standard Kit: All standard parts incl. wiring harness
  • Full Build Kit (Glider): Standard kit + servo set, battery and magnetic switch
  • Full Build Kit (Electro): Standard kit + servo set, Motor, controller and motor-battery
  • Read To Fly: Full Build Kit + complete assembly of the aircraft by us within a few days!
  • Premium Read To Fly: Full Build Kit + complete assembly of the aircraft by us within a few days! + high quality bags for all parts


  • Easy to build..........⭐⭐⭐⭐⭐
  • Easy to set up........⭐⭐⭐⭐⭐
  • Easy to fly...............⭐⭐⭐⭐⭐
  • Speed..................... ⭐⭐
  • Thermal................. ⭐⭐⭐⭐
  • Agility..................... ⭐⭐⭐
  • Strength.................⭐⭐⭐

Technical data:

  • Wingspan: 5.000 / 6.000 mm
  • Center of gravity: 158 / 190 mm
  • Flight weight: 13.000 / 15.000 gr
  • Scale: 1:3 / 1:2,5
  • Airfoil: HQ-3/15, HQ-3/12, HQ-2.5/12


  • Elevator
  • Rudder
  • Ailerons
  • Spoilers
  • Tow-Release

Wings and tailplane:

  • High strength balsa / pine construction
  • Clean, high quality processing
  • Covered and painted
  • White/red painted


  • High strength balsa / pine construction
  • Clean, high quality processing
  • Covered and painted

  • White/red painted
  • Clean Canopy, screwed and painted

Accessories included:

  • Glass canopy
  • Servo covers Servo support plate (fuselage)
  • Carbon wing connector
  • High quality clevis made of spring steel ⭐
  • Pre-assembled and encapsulated wiring harness ⭐

Further recommended accessories:

  • Fitting servo set (available here in the shop) ⭐
  • Magnetic switch (available here in the shop) ⭐

Servo recommendation:

  • Elevator: 2x KST X15-1208
  • Rudder: 1x KST DS725 MG
  • Aileron: 4x KST X15-1208
  • Airbrakes: 2x KST X15-1208
  • Tow Release: 1x KST DS725 MG
  • Note our low-priced servo sets in the accessories area! ⭐

Rudder Setup:

  • Elevator: 25 mm up / 15 down
  • Rudder: 60 mm left / right
  • outer Aileron: 25 mm up, 18 mm down
  • inner Aileron: 20 mm up, 12mm down


  • Ailerons: Normal
  • Airbrakes: full brake

(All mm data measured at the position of the largest deflection of the rudder)

Information about motorization:

  • Motor: Hacker A50-12L Turnado V3 kv450 - Glider
  • Controller: Hacker MasterSPIN 99 Pro OPTO
  • Battery: Hacker TopFuel LiPo 35C Power-X 5000mAh 6S MTAG
  • Propeller: 16x8 CFK Weiß
  • Spinner: Center piece only

Building description:

More Ressources:


☎ +49 2405 4067752 (german / english)

Whatsapp: +49 152 31700200 (german / english)