Interstellar-Pino
from 2,199.00 €
Description
Please first select the exact variant above to see the exact price.
Interstellar-Pino
- Worldwide door to door delivery
- Full carbon wings
- Full carbon fuselage
- Ready wiring harness for fuselage and wings
- Simple bags for wings, elevator und fuselage included
References:
- Interstellar Pino 4.0m - Most Dynamic 4m Glider Ever Seen
- Interstellar Pino 4.0m - HomeBase Fun
- Interstellat Pino - 4m - On The Slope
- Interstellar Pino - 4m - Air 2 Air with Mid Air Collision
- Interstellar Pino - 4.0m - Open-Pit Mining Flight
Our 4-metre Interstellar Pino is an all-round model for GPS Light or GPS Sport class. Of course, it can also be used on slopes and flats for fun.
Its versatility is convincing, no matter what the weather or terrain conditions are.
Due to its low weight and thin wing profile, it scores with excellent dynamics even in very weak conditions. With its ballasting possibilities there are no limits for the Interstellar-Pino even in strong winds.
The self-developed profile trak - consisting of 5 profiles - convinces in versatility and dynamics.
Areas of application: Electric propulsion on the level or slope flight.
The pack size is only 1.6 m.
Version:
- Glider
- Electro (FES)
Build:
- Standard Kit:
- All standard parts
- Wiring harness
- Simple bags for Wings, Stabiliser and Fuselage
- Full Build Kit (Glider):
- All standard parts
- Wiring harness
- Simple bags for Wings, Stabiliser and Fuselage
- Servo Set
- Battery
- Magnetic Switch
- Full Build Kit (Electro):
- All standard parts
- Wiring harness
- Simple bags for Wings, Stabiliser and Fuselage
- Servo Set
- Battery
- Motor
- Controller
- Ready To Fly:
- Simple bags for Wings, Stabiliser and Fuselage
- Simple LDS linkages in the wing
- Complete assembly of the aircraft by us within a few days!
- Read To Fly Premium:
- Simple LDS linkages in the wing
- Complete assembly of the aircraft by us within a few days!
- Simple bags for Wings, Stabiliser and Fuselage
- High quality bags for all parts from Revoc
Classification:
- Easy to build..........⭐⭐⭐
- Easy to set up........⭐⭐⭐⭐
- Easy to fly...............⭐⭐⭐⭐⭐
- Speed..................... ⭐⭐⭐⭐
- Thermal................. ⭐⭐⭐⭐⭐
- Agility..................... ⭐⭐⭐⭐
- Strength (light) ......⭐⭐⭐
- Strength (normal) .⭐⭐⭐⭐
- Strength (strong) ...⭐⭐⭐⭐⭐
Technical data:
- Wingspan: 3.990 mm (157″)
- Wing area: 75 dm²
- Center of gravity: 84 mm
- Flight weight (electric light): 2.700 gr (5,9 lbs)
- Flight weight (electric normal): 3.000 gr (6,6 lbs)
- Flight weight (electric strong) : 3.500 gr (7,7 lbs)
- Airfoil: PCM
- Mix5 d=7,58% @ 26,0% C=1,66% @ 39,8
- Mix6 d=6,87 @ 24,6 C=1,62 @ 36,6
- Zone V2 60 d= 6,16 @ 23 C=1,59 @ 34,2
- Zone V2 40 d=5,41 @ 22,1 C=1,48 @ 30,8
- Zone V2 20 d=5 @ 18,6 C=1 @ 32,6
- Thickness: 8% - 4,2%
Controls:
- Elevator
- Rudder
- Ailerons
- Flaps
- Engine
Wings and tailplane:
- High strength carbon wings in sandwich build
- Clean, high quality processing
- Painted in the mould
Fuselage:
- High strength carbon fuselage
- Clean, high quality processing
- Painted in the mould
Accessories included:
- Servo covers Servo support plate (fuselage)
- High quality clevis made of spring steel ⭐
- Pre-assembled and encapsulated wiring harness ⭐
Further recommended accessories:
- Fitting servo set (available here in the shop) ⭐
- Magnetic switch (available here in the shop) ⭐
Servo recommendation:
- V-Tail: 2x KST-HS08
- Aileron: 2x KST-X08Hplus
- Aileron: 2x KST-X10mini
- Flaps: 2x KST-X10
- Note our low-priced servo sets in the accessories area! ⭐
Rudder Setup:
- V-Tail: 10 mm up / down
- Aileron: 16 mm up, 12 mm down
- Speed: All 2mm up
- Thermal 1: All 2mm down
- Thermal 2: All 3mm down
- Flaps: 75 degree down
Butterfly/Landing:
- Aileron: 8mm up
- Inner Flaps: full down
- Outer flaps: half way down
(All mm data measured at the position of the largest deflection of the rudder)
Information about motorization:
- Motor: Hacker E40-XS 2.5D 6.7:1 kv 3950
- Controller: PowerBEAST C100 Basic
- Battery: TATTU 2300mAh 14.8V 75C 4S
- Propeller: GM CFK black Folding 16x10
- Spinner: GM CFK 32/8/6 mm
Wing connectors:
- Light version: Carbon connector (steel connector available as additional ballast in the accessories)
- Normal version: Carbon connector (steel connector available as additional ballast in accessories)
- Strong version: steel connector
Building description:
You can find our current build times for RTF models: <Click Here>
More Ressources:
✉ info@composite-rc-gliders.com
☎ +49 2405 4067752 (german / english)
Whatsapp: +49 152 31700200 (german / english)