from 999.00 €

incl. VAT, plus delivery
Delivery time: 60 day(s)


Please first select the exact variant above to see the exact price.


  • Worldwide door-to-door shipping
  • Completely assembled (ARF) or ready to fly (RTF)
  • Full carbon wing
  • Full carbon fuselage with 2.4 Ghz friendly nose
  • Ready-made wiring harness for fuselage and wings
  • Significantly improved layup
  • All high-stress areas additionally reinforced with carbon
  • Increased durability and service life
  • Highly ballastable
  • Light and double carbon versions on request
  • Designed by Dr James Hammond

Advance booking only in green/black/white design! See the first three pictures in the gallery.


  • Videos comming soon

A fast slope racer and all-rounder that can give you the ultimate adrenaline rush!

Are you looking for the ultimate challenge in manoeuvrability and speed? Then you've come to the right place with this aeroplane. Nevertheless, the model can also be landed very slowly thanks to its very large flaps.

The Edge-2020-X is the successor to the Edge-2000-X with the following changes:

  • Aerodynamically and Flight-mechanically completely revised and improved
  • Faster - Higher - Further
  • Larger flaps
  • Twice as large ballast pipes in the wings
  • Ballastable carbon fibre connector
  • 10mm servos in the wings

This is the long-awaited replacement for the classic Typhoon, which was designed by Dr James Hamond over 15 years ago and is now the best-selling 2-metre model of all time with over 2500 models sold. And not without reason. We offered it with an improved layup and a few other changes as the Edge-2000-X.

Originally intended as an introduction to modelling, it has been a first model for many, a trainer and a well-flying, reliable and easy-to-install model for hundreds of slope flyers. In the new version, everything has been improved, both in construction and aerodynamics, while retaining the basic dimensions and curves that characterise the model and have made it a classic. The all-new We are ready for your pre-order of the CRG-Edition of the most innovative 2m glider of all time from "Doc" James Hammond with Aeroic Composite Aviation Products. & Aeroic Composites & Friends of Aeroic . https://composite-rc-gliders.com/p/edge-2020-x is lighter, stronger, faster and slower to land than the original.

In addition, it has better flight performance, especially in light winds, acceleration and energy conservation.

The servos and components are very easy to install. This model is also available in an aeroic edition as Typhoon MK2 Toccata

The pack size is only 1.1 m.


  • Glider
  • Electro (FES) with scale spinner and white propeller


  • Standard Kit:
    • All standard parts
    • Wiring harness
  • Full Build Kit (Glider):
    • All standard parts
    • Wiring harness
    • Servo Set
    • Battery
    • Magnetic Switch
  • Full Build Kit (Electro):
    • All standard parts
    • Wiring harness
    • Servo Set
    • Battery
    • Motor
    • Controller
  • Ready To Fly:
    • Complete assembly of the aircraft by us within a few days!
  • Read To Fly Premium:
    • Complete assembly of the aircraft by us within a few days!
    • Aluminium case


  • Easy to build..........⭐⭐⭐⭐⭐
  • Easy to set up........⭐⭐⭐⭐⭐
  • Easy to fly...............⭐⭐⭐⭐
  • Speed..................... ⭐⭐⭐⭐
  • Thermal................. ⭐⭐⭐
  • Agility..................... ⭐⭐⭐⭐⭐
  • Strength.................⭐⭐⭐⭐⭐

Technical data:

  • Wingspan: 2.000 mm (80″)
  • Wing area: 31 dm²
  • Center of gravity: 86 mm
  • Flight weight: 1.600 gr (3.5 lbs)
  • Airfoil: JH-817 (Tailplane: JH-10SYM)


  • Elevator
  • Rudder
  • Ailerons
  • Flaps

Wings and tailplane:

  • High strength gel-coat carbon wings in sandwich build
  • Clean, high quality processing
  • Painted in the mould


  • High strength gelcoat glass/carbon/aramid fuselage
  • Clean, high quality processing
  • Painted in the mould
  • Glass canopy

Accessories included:

  • Glass canopy
  • Glass servo covers Servo support plate (fuselage)
  • High quality clevis made of spring steel ⭐
  • Pre-assembled and encapsulated wiring harness ⭐

Further recommended accessories:

  • Fitting servo set (available here in the shop) ⭐
  • Magnetic switch (available here in the shop) ⭐

Servo recommendation:

  • Elevator: 1x KST HS08
  • Rudder: 1x KST HS08
  • Aileron: 2x KST X10mini
  • Flaps: 2x KST X10mini
  • Note our low-priced servo sets in the accessories area! ⭐

Rudder Setup:

  • Elevator: 7 mm up / down
  • Rudder: 15 mm left / right
  • Aileron: 10 mm up, 7 mm down
  • Flaps: 3 mm down, 2 mm up

(All mm data measured at the position of the largest deflection of the rudder)

Information about motorization:

  • Motor: Hacker A20-12XL
  • Controller: PowerBeast C60 Basic
  • Battery: Hacker LiPo 3S - 2400 mAh
  • Propeller: GM CFK white Folding Propeller 11x6
  • Spinner: 39mm GM CFK white

Building description:

You can find our current build times for RTF models: <Click Here>

More Ressources:


☎ +49 2405 4067752 (german / english)

Whatsapp: +49 152 31700200 (german / english)