Please first select the exact variant above to see the exact price.

Sessanta

• Full carbon wing
• Carbon fuselage (front part glass)
• Ready wiring harness for fuselage and wings
• Ballast tube included
• Small parts included

Sessanta Slope is a small sized sport glider which is very agile and preferred for medium to tougher conditions or good thermals. The speed range of this glider is very large and it resists harder landings easily. The fine crafted parts fit perfect together and the build time is manageable.

Airfoils are calculated to give you the possibility to reach very high speeds with very stable overall characteristics.

The Sessanta Slope is very good to handle in every situation and the landing with butterfly is absolutely stressless.

Pack size is only 1,50 m.

Version:

• Glider

Build:

• Standard Kit: All standard parts incl. wiring harness
• Full Build Kit (Glider): Standard kit + servo set, battery and magnetic switch
• Read To Fly: Full Build Kit + complete assembly of the aircraft by us within a few days!
• Premium Ready To Fly: Full Build Kit + complete assembly of the aircraft by us within a few days! + high quality bags for all parts

Classification:

• Easy to build..........⭐⭐⭐⭐
• Easy to set up........⭐⭐⭐⭐
• Easy to fly...............⭐⭐⭐
• Speed..................... ⭐⭐⭐⭐⭐
• Thermal................. ⭐⭐⭐
• Agility..................... ⭐⭐⭐⭐⭐
• Strength.................⭐⭐⭐⭐

Technical data:

• Wingspan: 1500 mm (60")
• Wing area: 15,3 dm²
• Center of gravity: 70 mm
• Flight weight: 1150 g
• Airfoil: JH2580, JH2575, JH2570

Controls:

• Elevator
• Rudder
• Ailerons
• Flaps

Wings and tailplane:

• High strength gel-coat carbon reinforced glass wings in sandwich build
• Clean, high quality processing
• upside: white/red/blue painted in the mould
• bottom: white/red chessboard painted in the mould

Fuselage:

• High strength gelcoat glass/carbon fuselage
• Clean, high quality processing
• Painted in the mould

Accessories included:

• Glass canopy
• Glass servo covers Servo support plate (fuselage)
• small parts, clevises included
• Pre-assembled wiring harness

Further recommended accessories:

• Fitting servo set (available here in the shop) ⭐
• Magnetic switch (available here in the shop) ⭐

Servo recommendation:

• Elevator: KST X08H
• Rudder: KST X08H
• Aileron: 2x KST HS08
• Flaps: 2x KST HS08
• Note our low-priced servo sets in the accessories area! ⭐

Rudder Setup:

• Elevator: 6 mm up / down
• Rudder: 8 mm left / right
• Aileron: 8 mm up, 6 mm down
• Flaps: 5 mm up, 5 mm down

Butterfly/Landing:

• Flaps: full down
• Ailerons 6 mm up
• 12% elevator down mix

(All mm data measured at the position of the largest deflection of the rudder)

Information about motorization:

• Motor mount 29 mm
  
• Spinner: 30 mm
  
• Motor: A20-12XL
  
• Controller: Hacker X-30-pro
  
• Battery: Hacker LiPo 3S - 1300 mAh
  
• Propeller: 11 x 6 ACC

✉ info@aeroic.eu

☎ +49 2405 4067752 (german / english)

Whatsapp: +49 152 31700200 (german / english)