TT-Equinox

from 2,099.00 €

incl. VAT, plus delivery
Delivery time: 3 day(s)

Description


Please first select the exact variant above to see the exact price.


Thermal Taker Equinox 2m

  • Full carbon wing
  • Finished wiring harness Fuselage
  • tray for servos and connectors included
  • High level of prefabrication


References/Videos:


The Thermal Taker Equinox is another "always with you" model in our portfolio. With the separately available case, it can be easily stowed in the trunk between the luggage.


The Equinox is excellently suited if you want to crank out the smallest thermal fields and land in the smallest of spaces.


When circling in thermals, the model is just as dynamic as its big brother the TT-Echoes. Easily controllable at any time and perfectly controlled. The route performance for such a small model is also unrivaled.


When landing with Butterfly, the model remains good-natured and easy to control at all times, so that the classic hand landing is easy to implement.


The pack size is only 1m.


Version:

  • Glider
  • Electro


Build:

  • Standard Kit: All standard parts incl. wiring harness
  • Full Build Kit (Glider): Standard kit + servo set, battery and magnetic switch
  • Full Build Kit (Electro): Standard kit + servo set, impeller, controller and motor-battery
  • Read To Fly: Full Build Kit + complete assembly of the aircraft by us within a few days!
  • Premium Read To Fly: Full Build Kit + complete assembly of the aircraft by us within a few days! + high quality aluminium case for all parts


Classification:

  • Easy to build..........⭐⭐⭐
  • Easy to set up........⭐⭐⭐⭐
  • Easy to fly...............⭐⭐⭐⭐
  • Speed..................... ⭐⭐⭐
  • Thermal................. ⭐⭐⭐⭐⭐
  • Agility..................... ⭐⭐⭐⭐
  • Strength.................⭐⭐⭐


Technical data:

  • Wingspan: 2.000 mm
  • Wing area: 31,8 dm²
  • Center of gravity: 71 mm
  • Flight weigh glider: 440 g
  • Flight weigh E-glider: 540 g
  • Airfoil Wing: AG-44/45/46 mod.
  • Airfoil Tail: NACA-0006


Controls:

  • Elevator
  • Rudder
  • Ailerons
  • Flaps


Wings and tailplane:

  • Carbon wing in full core construction
  • Clean, high quality processing
  • painted in the mould


Fuselage:

  • High strength carbon fuselage
  • Clean, high quality processing


Accessories included:

  • Glass canopy
  • Wing connector 4 ° hollow aluminum

  • carbon servo covers
  • Servo tray (fuselage)
  • Pre-assembled and encapsulated wiring harness ⭐


Further recommended accessories:

  • Fitting servo set (available here in the shop) ⭐
  • Magnetic switch (available here in the shop) ⭐


Servo recommendation:

  • V-Tail: 2x KST X06
  • Aileron: 2x KST X06H
  • Flaps: 2x KST X06H
  • Note our low-priced servo sets in the accessories area! ⭐


Rudder Setup:

  • Elevator: 8 mm up / down
  • Rudder: 15 mm left / right (15% differential)
  • Aileron: 10 mm up, 7 mm down
  • Flaps: 40 mm down, 5 mm up


Butterfly/Landing:

  • Aileron: 7 mm up
  • Flaps: full down
  • Elevator: 15% downmix


Snap-Flap:

  • Ailerons: 4mm
  • Flaps: 4mm


(All mm data measured at the position of the largest deflection of the rudder)


Information about motorization:

  • Motor: A10-7L kv2200 + 4,4:1
  • Controller: Hacker X-20-Pro mit BEC
  • Battery: 3s/650 mah
  • Propeller: 12x10 CFK folding prop black
  • Spinner: CFK 30 mm


Building description:


More Ressources:



info@composite-rc-gliders.com

☎ +49 2405 4067752 (german / english)

Whatsapp: +49 152 31700200 (german / english)