TT Aurora

from 749.00 €

incl. VAT, plus delivery
Delivery time: 3 day(s)

Description


Please choose first the "Build" to see the price and more details on your choice . Then you'll be able to put your product into the basket.


TT-Aurora

  • Full carbon wings and fuselage
  • Large aramid-reinforced fuselage
  • Climbing heights up to 80 Meters


The TT Aurora from our brand new Thermal Taker product line impresses with its absolutely outstanding climbing performance


Experienced F3K pilots can throw this plane to 60 - 70 meters, competitors reach up to 80 meters in height. This puts the Aurora TT in the world class competition area.


The low all-up weight and a proprietary airfoil let this plane respond to the smallest thermal whiff. At the same time, full carbon construction makes the Aurora TT strong enough for every-day flying.


(Some photos on the slope show an older design)


References/Videos:



Build:

  • Standard Kit: All standard parts incl. wiring harness
  • Full Build Kit (Glider): Standard kit + servo set, battery and magnetic switch
  • Read To Fly: Full Build Kit + complete assembly of the aircraft by us within a few days!
  • Premium Read To Fly: Full Build Kit + complete assembly of the aircraft by us within a few days! + high quality bags for all parts


Classification:

  • Easy to build..........⭐⭐⭐⭐⭐
  • Easy to set up........⭐⭐⭐⭐⭐
  • Easy to fly..............⭐⭐⭐⭐⭐
  • Speed.................... ⭐⭐
  • Thermal................. ⭐⭐⭐⭐⭐
  • Agility..................... ⭐⭐⭐⭐⭐


Technical data:

  • Wingspan: 1.500 mm
  • Wing area: 20,4 dm²
  • Wing Aspect Ratio: 11
  • Airfoil thickness: 5,8 %
  • Center of gravity: 68 mm
  • Flight weight glider: from 220 gr
  • Flight weight electro: from 330 gr
  • Wing loading: 10,8 gr/dm²


Controls:

  • Elevator
  • Rudder
  • Ailerons


Wings and tailplane:

  • Carbon wings, XPS core
  • Clean, high quality processing
  • Various carbon inlays at high stressed points
  • Painted in the mould


Fuselage:

  • Carbon fuselage
  • Clean, high quality processing
  • Various carbon inlays at high stressed points ⭐
  • Painted in the mould
  • Green canopy


Accessories included:

  • Carbon canopy with glued carbon fastening spring ⭐
  • 4x servo frames
  • Glass control horns ⭐


Further recommended accessories:

  • Fitting servo set (available here in the shop) ⭐
  • Li-Po 7.4V 350 mAh (available here in the shop) ⭐
  • Magnetic switch (available here in the shop) ⭐


Servo recommendation:

  • Tail: 2x KST X06
  • Aileron: 2x KST X06
  • Note our low-priced servo sets in the accessories area! ⭐


Rudder setup:

  • Elevator: 7 mm up/down
  • Rudder: 15 mm left/right
  • Aileron: 13 mm up, 8 mm down
  • Flaps: 70 degrees
  • Snap-Flap: 2 mm landing flap, aileron fitting
  • Speed: flaps 2 mm high, ailerons matching
  • Disc launch: flaps 2 mm high, ailerons matching


(All mm data measured at the position of the largest deflection of the rudder)


Motorization information:

  • Motor mount 24 mm
  • Spinner: 25 mm
  • Electro: Motor: T-motor 1507 2700kV
  • Controller: LittleBee 20A
  • Battery: Hacker 2S 450mah
  • Propeller: carbon 7x4


Assembly instructions:


Important building tip:

  • Deflect the aileron so that the flaps are down about 15mm with the "neutral" servo.
  • Then correct the neutral position during programming
  • Otherwise you will not mechanically reach all the necessary flap travels


More Ressources:



info@composite-rc-gliders.com

☎ +49 2405 4067752 (german / english)

Whatsapp: +49 152 31700200 (german / english)