SZD-56-2 Diana-2

from 1,199.00 €

incl. VAT plus delivery
Delivery time: 1 day(s)

Description


Please choose first the "Version", the "Material" and the "Build" to see the price and more details on your choice . Then you'll be able to put your product into the basket.


SZD-56-2 Diana-2

With the Diana-2 we offer a semi-scale sailor in the scale 1: 4.


With a wingspan of 3.75 m and a take-off weight of around 4000 g, it can be very nicely circled in the thermals, but also likes the fast overflights over the course.


The model is equipped with a carbon D-box and the filigree converging hull is reinforced with plenty of carbon enforcements, so that the daily harder landings on the slope is not any problem for the model.


The Diana-2 is an everyday and good-natured beauty.


Version:

  • Glider/Electro: No difference for this plane


Material:

  • Glass/Carbon: Glass with various carbon reinforcements
  • Full Carbon: Carbon fuselage and wings. Very solid. (front fuselage partly with glass for better signal reception)


Build:

  • Standard Kit: All standard parts incl. wiring harness
  • Full Build Kit (Glider): Standard kit + servo set, battery and magnetic switch
  • Full Build Kit (Electro): Standard kit + servo set, spinner, propeller, motor, if necessary, a gearbox, controller and motor-battery
  • Read To Fly: Full Build Kit + complete assembly of the aircraft by us within a few days!


Classification:

  • Easy to build..........⭐⭐⭐⭐
  • Easy to set up........⭐⭐⭐⭐⭐
  • Easy to fly..............⭐⭐⭐⭐⭐
  • Speed.................... ⭐⭐⭐
  • Thermal................. ⭐⭐⭐⭐⭐
  • Agility..................... ⭐⭐


Technical data:

  • Wingspan: 3.748 mm
  • Wing area: 63,7 dm²
  • Wing Aspect Ratio: 21,8
  • Airfoil thickness: 10,8 %
  • Center of gravity: 70-75 mm
  • Flight weight: 4000 gr.
  • Wing loading: 60,5 gr/dm²
  • Airfoil: HN-203
  • Scale: 1:4


Controls:

  • Elevator
  • Rudder
  • Ailerons
  • Flaps
  • Airbrakes
  • Tow Release


Wings and tailplane:

  • High strength gel-coat carbon wings in shell design
  • Clean, high quality processing
  • Various carbon inlays at high stressed points
  • Carbon D-Bx
  • Painted in the mould


Fuselage:

  • High strength gelcoat carbon fuselage
  • Clean, high quality processing
  • Multiple non-stop carbon inserts ⭐
  • Various carbon inlays at high stressed points ⭐
  • Painted in the mould
  • Clean Canopy


Accessories included:

  • Glass canopy
  • Glass servo covers Servo support plate (fuselage)
  • 4x servo frames (wings)
  • Glass control horns ⭐
  • High quality clevis made of spring steel ⭐
  • Pre-assembled and encapsulated wiring harness ⭐


Further recommended accessories:

  • Fitting servo set (available here in the shop) ⭐
  • Magnetic switch (available here in the shop) ⭐


Servo recommendation:

  • Elevator: KST X10
  • Rudder: KST DS1509
  • Aileron: 2x KST X10
  • Flaps: 2x KST X10
  • Airbrakes: 2x KST X10
  • Tow Release: KST DS1509
  • Note our low-priced servo sets in the accessories area! ⭐


Rudder setup:

  • Elevator: 9 mm up/down
  • Rudder: 30 mm left/right
  • Aileron: 13 mm up, 6 mm down
  • Flaps: 3 mm up, 4 mm down


(All mm data measured at the position of the largest deflection of the rudder)


Information about motorization:

  • Motor: Hacker B50-8L 6,7:1
  • Controller: Hacker Master Spin 70-opto
  • Battery: Hacker LiPo 4S - 3400 mAh
  • Propeller: 18 x 11 ACC


Ballasting recommendation:

  • Wind > 10 km/h: 460 [gr.]
  • Wind > 13 km/h: 610 [gr.]
  • Wind > 16 km/h: 770 [gr.]
  • Wind > 20 km/h: 920 [gr.]
  • Wind > 23 km/h: 1070 [gr.]
  • Wind > 25 km/h: 1230 [gr.]
  • Wind > 28 km/h: 1380 [gr.]
  • Wind > 31 km/h: 1540 [gr.]


Fragen? info@composite-rc-gliders.com