Nimbus-4 5.1 m

from 2,229.00 €

incl. VAT, plus delivery
Delivery time: 3 day(s)

Description


Please first select the exact variant above to see the exact price.


Nimbus-4 5.17 m

  • Four-part full carbon wing
  • Large aramid-reinforced fuselage
  • Retractable landing gear included and fully installed
  • Canopy glued and painted
  • Cockpit locking installed
  • Cockpit extension set included
  • Including instrument panel
  • Finished wiring harness for fuselage and wings


The Nimbus 4 spans 26.4 m and had its first flight in 1990 and has since been made more independent with various engines. With a glide ratio of about 60, the Nimbus has a terrific flight performance and excellent slow flight characteristics.


Our model is designed on a scale of 1: 5 and should have the flight characteristics of the original if possible. Thus, the pilot gets a thoroughbred thermal model with this model. To fly uncritically at any time. The model accepts the slightest updraft and translates it into height very well. The nimbus can be circled both comfortably and dynamically.


The required basic speed of the model is very low and thus the Nimbus can be landed precisely and stress-free even on relatively small loading areas with the help of the spoiler and flaps.


The pack size is only 1.6m.


Version:

  • Glider
  • Electro (FES) with scale spinner and white propeller


Build:

  • Standard Kit: All standard parts incl. wiring harness
  • Full Build Kit (Glider): Standard kit + servo set, battery and magnetic switch
  • Full Build Kit (Electro): Standard kit + servo set, impeller, controller and motor-battery
  • Read To Fly: Full Build Kit + complete assembly of the aircraft by us within a few days!
  • Premium Read To Fly: Full Build Kit + complete assembly of the aircraft by us within a few days! + high quality bags for all parts


Classification:

  • Easy to build..........⭐⭐⭐
  • Easy to set up........⭐⭐⭐
  • Easy to fly..............⭐⭐⭐⭐⭐
  • Speed.................... ⭐
  • Thermal................. ⭐⭐⭐⭐⭐
  • Agility..................... ⭐


Technical data:

  • Wingspan: 5170 mm
  • Wing area: 73,3 dm²
  • Center of gravity: 65 mm
  • Flight weight: 5500 gr
  • Scale: 1:5
  • Airfoil: HQ Strak


Controls:

  • Elevator
  • Rudder
  • Ailerons
  • Flaps
  • Spoilers
  • Landing gear


Wings and tailplane:

  • High strength gel-coat carbon wings in sandwich build
  • Clean, high quality processing
  • White painted in the mould


Fuselage:

  • High strength gelcoat glass/carbon/aramid fuselage
  • Clean, high quality processing
  • Painted in the mould
  • Clean Canopy, glued and painted


Accessories included:

  • Glass canopy
  • Glass servo covers Servo support plate (fuselage)
  • Pre-assembled and encapsulated wiring harness ⭐


Further recommended accessories:

  • Fitting servo set (available here in the shop) ⭐
  • Magnetic switch (available here in the shop) ⭐


Servo recommendation:

  • Elevator: KST X12
  • Rudder: KST X12
  • Aileron: 4x KST X08H plus
  • Flaps: 4x KST X08H plus
  • Airbrakes: 2x KST X08H plus
  • Landing gear: KST X12
  • Note our low-priced servo sets in the accessories area! ⭐


Rudder Setup:

  • Elevator: 15 mm up / down
  • Rudder: 25 mm left / right
  • Outside ailerons: 12mm up, 8mm down
  • Inside ailerons: 10mm up, 6mm down
  • Flaps outside: 8 mm high, 4 mm down
  • Flaps inside: 6 mm high, 2 mm down


Butterfly/Landing:

  • Inner Flaps: full down
  • Outer flaps: half way down
  • Airbrakes: full brake

(All mm data measured at the position of the largest deflection of the rudder)


Information about motorization:

  • Motor: Hacker A40
  • Controller: Hacker SB-pro 70A
  • Battery: Hacker ECO-X 4s 3000mah
  • Propeller: Scale Folding Propeller 16x8
  • Spinner: Propeller Scale Spinner


Building description:


References/Videos:


More Ressources:



info@composite-rc-gliders.com

☎ +49 2405 4063763 (german / english)

Whatsapp: +49 152 31700200 (german / english)