Nimbus-4 10.5 m

from 7,499.00 €

incl. VAT, plus delivery
Delivery time: 45 day(s)

Description


Please first select the exact variant above to see the exact price.


Nimbus-4 10.5 m

  • Six-part full glass/carbon wing
  • Large aramid-reinforced fuselage
  • Retractable landing gear included and fully installed incl. brakes
  • Canopy glued and painted
  • Cockpit locking installed
  • Cockpit extension set included
  • Including instrument panel
  • Finished wiring harness for fuselage and wings
  • FBK/RTF: Inclusive PowerBoxSystems PowerBox Competition SR2


References/Videos:


The Nimbus 4 spans 26.4 m and had its first flight in 1990 and has since been made more independent with various engines. With a glide ratio of about 60, the Nimbus has a terrific flight performance and excellent slow flight characteristics.


Our model is designed on a scale of 1: 2,5 and should have the flight characteristics of the original if possible. Thus, the pilot gets a thoroughbred thermal model with this model. To fly uncritically at any time. The model accepts the slightest updraft and translates it into height very well. The nimbus can be circled both comfortably and dynamically.


When towed, the model takes off very quickly and, due to its powerful spoilers and the existing wheel brake, only needs a remarkably small landing area.


The required basic speed of the model is very low and can therefore always be mastered safely.


The pack size is 3.0 m.


Version:

  • Glider
  • Electro (FES) with scale spinner and white propeller
  • EDF/Turbine on request ( >25 Kg)


  • Build:
    • Standard Kit:
      • All standard parts
      • Wiring harness
    • Full Build Kit (Glider):
      • All standard parts
      • Wiring harness
      • Servo Set
      • Battery
      • PowerBoxSystems PowerBox Competition SR2
    • Full Build Kit (Electro):
      • All standard parts
      • Wiring harness
      • Servo Set
      • Battery
      • Motor
      • Controller
      • PowerBoxSystems PowerBox Competition SR2
    • Ready To Fly:
      • Complete assembly of the aircraft by us within a few days!
    • Read To Fly Premium:
      • Complete assembly of the aircraft by us within a few days!
      • High quality bags for all parts from Revoc


Classification:

  • Easy to build..........⭐⭐⭐⭐
  • Easy to set up........⭐⭐
  • Easy to fly..............⭐⭐⭐⭐⭐
  • Speed.................... ⭐⭐⭐
  • Thermal................. ⭐⭐⭐⭐⭐
  • Agility..................... ⭐⭐⭐


Technical data:

  • Wingspan: 10.500 mm
  • Wing area: 250 dm²
  • Center of gravity: 112 mm
  • Flight weight: 24.500 gr
  • Scale: 1:2,5
  • Airfoil: HQ 2.5 Strak


Controls:

  • Elevator
  • Rudder
  • Ailerons
  • Flaps
  • Spoilers
  • Landing gear
  • Brakes


Wings and tailplane:

  • High strength gel-coat glass/carbon wings in sandwich build
  • Clean, high quality processing
  • White painted in the mould


Fuselage:

  • High strength gelcoat glass/carbon/aramid fuselage
  • Clean, high quality processing
  • Painted in the mould
  • Clean Canopy, glued and painted


Accessories included:

  • Glass canopy
  • Glass servo covers Servo support plate (fuselage)
  • Pre-assembled and encapsulated wiring harness ⭐


Further recommended accessories:

  • Fitting servo set (available here in the shop) ⭐
  • Magnetic switch (available here in the shop) ⭐


Servo recommendation:

  • Elevator: 2x KST X10
  • Rudder: KST 725 MG
  • Aileron: 2x KST X10 mini / 4x KST X10
  • Flaps: 4x KST 725 &/ 2 x KST X10
  • Airbrakes: 2x KST 725 MG
  • Landing gear: KST 725 MG
  • Brakes: KST BLS 651
  • Note our low-priced servo sets in the accessories area! ⭐


Rudder Setup:

  • Elevator: 20 mm up / down
  • Rudder: 35 mm left / right
  • Outside ailerons: 12mm up, 8mm down
  • Middle ailerons: 11mm up, 7mm down
  • Inside ailerons: 10mm up, 6mm down
  • Flaps outside: 8 mm high, 4 mm down
  • Flaps middle: 7 mm high, 3 mm down
  • Flaps inside: 6 mm high, 2 mm down


Butterfly/Landing:

  • Inner Flaps: full down
  • Middle Flaps: full down
  • Outer flaps: full down
  • Airbrakes: full brake

(All mm data measured at the position of the largest deflection of the rudder)


Information about motorization:

  • Motor: Hacker A60-16L
  • Controller: Hacker MasterSPIN 170 Pro OPTO
  • Battery: 12S: 2x Hacker TopFuel LiPo 20C ECO-X 5000mAh 6S MTAG
  • Propeller: White Scale Propeller 20x13
  • Spinner: White Scale Spinner


Safety:

  • PowerBoxSystems PowerBox Competition SR2


Building description:


More Ressources:



✉ info@composite-rc-gliders.com

☎ +49 2405 4063763 (german / english)

Whatsapp: +49 152 31700200 (german / english)