MÜ-13 Bergfalke 5.0 m

from 3,399.00 €

incl. VAT, plus delivery
Delivery time: 30 day(s)


Please first select the exact variant above to see the exact price.

MÜ-13 Bergfalke 5.0 m

  • Fully assembled (ARF) or ready to fly (RTF)
  • You get exactly what you see in the pictures
  • Premium glider pilot available as an accessory
  • Completely built in balsa and pine
  • Glued with high quality adhesives
  • Hull painted gray inside
  • Covered with Oratex
  • Covering trimmed with pinking scissors
  • White and red paint (rolled) already applied - as shown in the photos
  • All labels already applied
  • Chassis included
  • Cockpit fully assembled, screwed and painted
  • Cockpit lock already installed
  • Instrument panels already installed
  • Finished wiring harness for fuselage and wings


5th place in the construction evaluation of the Glider Classics 2022 in Wächtersberg. Highest placement ever achieved for an RTF model!

The Akaflieg (academic flight group) München Mü-13 is a glider of the student flying group Akaflieg München and was designed by Egon Scheibe with the participation of Kurt Schmidt and Tony Tröger. It was considered to be one of the most successful gliders of its time and, in a two-seater version from the Scheibe-Flugzeugbau GmbH under the name Mü 13 E Bergfalke, was one of the most popular training aircraft of the post-war period.

The modified replica of a Mü-13 D has been in the possession of Akaflieg Munich again since 2000 and is currently being completely overhauled.

The model is built with a lot of love and is extremely similar to the original. The very high degree of prefabrication makes assembly child's play. Despite its fragile construction, the model can be classified as robust.

The Mü-13 also has a fantastic flight image as a model that is second to none. An eye-catcher wherever it flies. Because of its low weight, both hand launching and landing are always a pleasure.

Are you looking to slow down and deceleration? Then this model is just right for you!

The pack size is only 2.42 m.


  • Glider
  • Electro (FES) with scale spinner and white propeller


  • Standard Kit: All standard parts incl. wiring harness
  • Full Build Kit (Glider): Standard kit + servo set, battery and magnetic switch
  • Full Build Kit (Electro): Standard kit + servo set, Motor, controller and motor-battery
  • Read To Fly: Full Build Kit + complete assembly of the aircraft by us within a few days!
  • Premium Read To Fly: Full Build Kit + complete assembly of the aircraft by us within a few days! + high quality bags for all parts


  • Easy to build..........⭐⭐⭐⭐⭐
  • Easy to set up........⭐⭐⭐⭐⭐
  • Easy to fly...............⭐⭐⭐⭐⭐
  • Speed..................... ⭐
  • Thermal................. ⭐⭐⭐⭐
  • Agility..................... ⭐⭐
  • Strength.................⭐⭐

Technical data:

  • Wingspan: 5.000 mm
  • Center of gravity: 120 mm
  • Flight weight: 8.000 gr
  • Scale: 1:3,5
  • Airfoil: HQ-2,5/12 to HQ-3,5/12


  • Elevator
  • Rudder
  • Ailerons
  • Spoilers
  • Tow-Release

Wings and tailplane:

  • High strength balsa / pine construction
  • Clean, high quality processing
  • Covered and painted
  • White/red painted


  • High strength balsa / pine construction
  • Clean, high quality processing
  • Covered and painted

  • White/red painted
  • Clean Canopy, screwed and painted

Accessories included:

  • Glass canopy
  • Servo covers Servo support plate (fuselage)
  • Carbon wing connector
  • High quality clevis made of spring steel ⭐
  • Pre-assembled and encapsulated wiring harness ⭐

Further recommended accessories:

  • Fitting servo set (available here in the shop) ⭐
  • Magnetic switch (available here in the shop) ⭐

Servo recommendation:

  • Elevator: 2x KST X10mini
  • Rudder: 1x KST DS725 MG
  • Aileron: 2x KST X10
  • Airbrakes: 2x KST X10mini
  • Tow Release: 1x KST DS725 MG
  • Note our low-priced servo sets in the accessories area! ⭐

Rudder Setup:

  • Elevator: 25 mm up / 15 down
  • Rudder: 60 mm left / right
  • Aileron: 25 mm up, 18 mm down


  • Ailerons: Normal
  • Airbrakes: full brake

(All mm data measured at the position of the largest deflection of the rudder)

Information about motorization:

  • Motor: A40-10L V4 14-Pole kv500
  • Controller: Hacker Speed Controller X-70-SB-Pro
  • Battery: TopFuel LiPo 20C ECO-X 3800mAh 5S MTAG
  • Propeller: White Scale Folding Propeller 16x8
  • Spinner: Center piece only (48mm)

Building description:

More Ressources:


☎ +49 2405 4067752 (german / english)

Whatsapp: +49 152 31700200 (german / english)