Please choose first the "Build" to see the price and more details on your choice . Then you'll be able to put your product into the basket.

Interstellar Erazor

FLY HARD OR GO HOME! NO EXCUSES!

• Fully assembled (ARF) or ready to fly (RTF)
  
• Significantly improved layup
  
• Additionally 2x24k carbon rovings in the leading edge
  
• All highly stressed areas additionally reinforced with CFRP
  
• Increased durability and service life
  
• Finished wiring harness for fuselage and wings
  
• Double-Carbon on request
• New: Design painted in the molds

With the Interstellar Erazor, slope pilots who want to let it rip are perfectly advised. Whether in the F3F or freestyle on the slope. You can chase the Erazor very closely through the corners without losing much speed. Due to the very slim overall construction, the Erazor offers very little air resistance and thus picks up speed very quickly, regardless of the maneuver you have done least.

Ballast options in the fuselage (approx. 900g) and in the wings (approx. 850g) offer ambitious recreational pilots and competition pilots the flexibility they need to adapt their Erazor to the current conditions in just a few simple steps.

Thermals? Yes, the Erazor can! And this too with a corresponding basic speed. Anyone looking for a "thermal sneak" will not be happy here.

The first of our fliers to receive six stars in our "speed" rating.

The finest carbon art in perfection awaits you here. Ultra robust carbon layout paired with an innovative full carbon spar, refined with carbon end strips. The dream of every carbon fetishist! The fuselage is made of carbon and in the front area of ​​fiberglass, so that you don't have to destroy the great aerodynamics with antennas outside the fuselage.

Material:

• FULL ULTRA Carbon: Fuselage and wings made of CFRP. Final festival. (Front fuselage GFK / AFK for better reception) Innovative spar construction Endfest for highest speeds
  
• Innovative spar construction
• Endles hard for maximum speed

References/Videos:

• Dynamic Soaring Flight
• Interstellar-Erazor 2.75m - Sylt - No Ballast
• Interstellar Erazor - E-Version on the slope
• Interstellar-Erazor 2.75m - Colli di San Fermo
• Test-MFI-0721
• Interstellar-Erazor-2.75m-WTF-Full-Ballast-Endless-Power
• Aufbaufotos
  
• Hochauflösende Fotos
  
• Weitere Information
• Soaring with no ballast
• Winter Soaring Fun
• Interstellar Erazor - Low wind at Wasserkuppe
• Interstellar Erazor - E-Version

Build:

• Standard Kit: All standard parts incl. wiring harness
  
• Full Build Kit (Glider): Standard kit + servo set, battery and magnetic switch
• Full Build Kit (Electro): Standard kit + servo set, spinner, propeller, motor, if necessary, a gearbox, controller and motor-battery (instead of a small receiver battery)
  
• Read To Fly: Full Build Kit + complete assembly of the aircraft by us within a few days!
  
• Premium Read To Fly: Full Build Kit + complete assembly of the aircraft by us within a few days! + high quality bags for all parts

Classification:

• Easy to build..........⭐⭐⭐⭐⭐⭐
  
• Easy to set up........⭐⭐⭐
  
• Easy to fly..............⭐⭐⭐⭐⭐⭐
  
• Speed.................... ⭐⭐⭐⭐⭐⭐
• Thermal................. ⭐⭐⭐
  
• Agility..................... ⭐⭐⭐⭐⭐

Technical data:

• Wingspan: 2.750 mm
  
• Wing area: 41,5 dm²

• Center of gravity: 100 mm
  

• Flight weight: 2550 gr

• Airfoil: JH25-825 (8%)

Controls:

• Elevator
  
• Rudder
  
• Ailerons
  
• Flaps
  

Wings and tailplane:

• High strength gel-coat double carbon wings in shell design
  
• Clean, high quality processing
• Painted in the mould

• All part joiner made from carbon ⭐
  
• All part joiner pre-finished and ready for assembly ⭐
  
• All tailplane joiner pre-finished and ready for assembly ⭐
  
• Sealing lips on all rudders ⭐
  
• ready glued rudder horns ⭐

Fuselage:

• High strength gelcoat double carbon/glass fuselage
  
• Clean, high quality processing

• Various carbon inlays at high stressed points ⭐
  
• Painted in the mould
  
• Green canopy
  
• ready glued rudder horn for rudder⭐

Accessories included:

• Glass canopy with glued carbon fastening spring ⭐
  
• Glass ballast tube ⭐
  
• Glass servo covers Servo support plate (fuselage)
  
• 4x servo frames (wings)
  
• Carbon wing joiner
• High quality clevis made of spring steel ⭐
• Small parts set
  
• Pre-assembled and encapsulated wiring harness ⭐
  

Further recommended accessories:

• Fitting servo set (available here in the shop) ⭐
  
• Li-Ion 7.4V 3350 mAh (available here in the shop) ⭐
  
• Magnetic switch (available here in the shop) ⭐
  
• Foils sticker sheet incl. transfer foil and felt squeegee (available here in the shop) ⭐
  

Servo recommendation:

• Tail: 2x KST X12
  
• Aileron: 2x KST X10
  
• Flaps: 2x KST X10
  
• Note our low-priced servo sets in the accessories area! ⭐
  

Rudder setup:

• V-Tail: 7mm up/down
  
• Aileron: 13 mm up, 8 mm down
  
• Flaps: 30mm down / 5mm up
  
• Snap-Flap: 2mm landing flap, aileron fitting
  
• Crow: landing flap 30mm down, aileron 13mm up, elevator 4mm down
  
• Speed: flaps 1 mm high, ailerons matching
• Thermal: flaps 2 down, ailerons 1mm down

(All mm data measured at the position of the largest deflection of the rudder)

Motorization:

• Hacker B40 12L with gear 4,4:1
• Regler: PowerBEAST C60 Basic
• 30mm Spinner with 16x8 propeller
  
• Gens Ace Tattoo 3S/2300
• Attention: There is very little space in the fuselage.
• In addition, the fuselage nose must be rounded with a little heat. This works well, but not perfectly.

Ballasting recommendation:

• Wind > 12 km/h: 670 [gr.]
  
• Wind > 15 km/h: 900 [gr.]
  
• Wind > 19 km/h: 1120 [gr.]
  
• Wind > 22 km/h: 1350 [gr.]
  
• Wind > 26 km/h: 1570 [gr.]
  
• Wind > 29 km/h: 1800 [gr.]
  
• Wind > 32 km/h: 2030 [gr.]
  
• Wind > 35 km/h: 2250 [gr.]

Questions? info@composite-rc-gliders.com