Foka-4 3,0 m
from 1,199.00 €
Description
Please choose first the "Version" and the "Build" to see the price and more details on your choice . Then you'll be able to put your product into the basket.
Foka 4
A classic glider reissued. With the Foka 4 we offer a semi-scale glider on a scale of 1: 5
The original was designed for cross-country flight in the 1960s. This is also the base for the design of our model. With a wingspan of 3.00 m and a take-off weight of around 4100 g, the model likes a good basic speed. Nevertheless, the Foka thermals are very well accepted and can be easily circled thanks to the V-shape.
The wings and tail units are made of full carbon. The fuselage is made of glass fiber / carbon / aramid mixed construction, as is usual with our scalers, to ensure maximum durability over a long period of time. With this layup, the daily harder landings on the slope are no problem for this model. Of course, the model is also fully aerobatic.
The built-in spoilers ensure a very good braking and descending effect without the model becoming critical in handling. Due to the well-dimensioned rudder, the model has a very direct response.
References/Videos:
- Foka 3.0m - Glider on the Slope
- Foka-4 3.0m Las kommen Stefan
- Foka-4 3.0m - Impeller Home Base Flying
- Foka-4 3.0m - Jan's Definition od a Maiden Flight
Version:
- Glider/Impeller: No difference for this plane
Build:
- Standard Kit: All standard parts incl. wiring harness
- Full Build Kit (Glider): Standard kit + servo set, battery and magnetic switch
- Full Build Kit (Impeller): Standard kit + servo set, impeller, controller and motor-battery
- Read To Fly: Full Build Kit + complete assembly of the aircraft by us within a few days!
- Premium Read To Fly: Full Build Kit + complete assembly of the aircraft by us within a few days! + high quality bags for all parts
Classification:
- Easy to build..........⭐⭐⭐⭐
- Easy to set up........⭐⭐⭐⭐⭐
- Easy to fly..............⭐⭐⭐⭐
- Speed.................... ⭐⭐⭐⭐⭐
- Thermal................. ⭐⭐⭐⭐
- Agility..................... ⭐⭐⭐⭐⭐
Technical data:
- Wingspan: 3.000 mm
- Center of gravity: 76 mm
- Flight weight: 4100gr.
- Scale: 1:5
Controls:
- Elevator
- Rudder
- Ailerons
- Airbrakes
- Vault Flaps (Most of the pictures show a variant without flaps)
Wings and tailplane:
- High strength gel-coat carbon wings in sandwich build
- Clean, high quality processing
- Painted in the mould
Fuselage:
- High strength gelcoat glass/carbon/aramid fuselage
- Clean, high quality processing
- Painted in the mould
- Clean Canopy
Accessories included:
- Glass canopy
- Glass servo covers Servo support plate (fuselage)
- High quality clevis made of spring steel ⭐
- Pre-assembled and encapsulated wiring harness ⭐
Further recommended accessories:
- Fitting servo set (available here in the shop) ⭐
- Magnetic switch (available here in the shop) ⭐
Servo recommendation:
- Elevator: KST DS725MG
- Rudder: KST X12
- Aileron: 2x KST X10
- Vault Flaps: 2x KST X10
- Airbrakes: 2x KST X10mini
- Note our low-priced servo sets in the accessories area! ⭐
Rudder setup:
- Elevator: 10 mm up/down
- Rudder: 35 mm left/right
- Aileron: 13 mm up, 6 mm down
(All mm data measured at the position of the largest deflection of the rudder)
Motorisierung FES-Electro:
- Motor: A30-12 XL V4 kv700 Glider
- Regler: Hacker Speed Controller X-70-SB-Pro
- Akku: Hacker TopFuel LiPo 20C ECO-X 3000 mAh 4S MTAG
- Luftschraube: GM Scale Folding Propeller 13x8
- Spinner: GM CFK Scale Spinne
Impeller:
- MigFlight JETEC E-80 Impeller 6-8S
- Motor: Leomotion 1900kv
- Controller: Hacker MasterSPIN 160 Pro BEC
- Battery: Hacker TF Power-X 5000-6S MTAG
Assembling Manual:
Questions? info@composite-rc-gliders.com