Please choose first the "Version" and the "Build" to see the price and more details on your choice . Then you'll be able to put your product into the basket.

SZD-56-2 Diana-2

• Carbon D-Box over the entire span
• Large aramid-reinforced fuselage
  
• Ready wiring harness for fuselage and wings
  

Scale Diana-2: We offer a 1:4 semi-scale model of the Diana-2

With a 3.75 m wingspan and an all-up weight of about 4000 grams, it circles nicely in thermals, yet also does high-speed passes down on the deck.

The wings feature carbon D-box construction. The elegantly tapered fuselage with its sleek tail boom is amply reinforced with carbon in all high-stress areas, so that less-than-perfect landings on the slope, for example, present no problem.

The Diana-2 is a well-behaved model for every-day use.

Version:

• Glider/Electro: No difference for this plane

Build:

• Standard Kit: All standard parts incl. wiring harness
  
• Full Build Kit (Glider): Standard kit + servo set, battery and magnetic switch
• Full Build Kit (Electro): Standard kit + servo set, spinner, propeller, motor, if necessary, a gearbox, controller and motor-battery
  
• Read To Fly: Full Build Kit + complete assembly of the aircraft by us within a few days!
  

Classification:

• Easy to build..........⭐⭐⭐⭐
  
• Easy to set up........⭐⭐⭐⭐⭐
  
• Easy to fly..............⭐⭐⭐⭐⭐
  
• Speed.................... ⭐⭐⭐
  
• Thermal................. ⭐⭐⭐⭐⭐
• Agility..................... ⭐⭐

Technical data:

• Wingspan: 3.748 mm
  
• Wing area: 63,7 dm²
  
• Wing Aspect Ratio: 21,8
  
• Airfoil thickness: 10,8 %
  
• Center of gravity: 70-75 mm
  
• Flight weight: 4000 gr.
  
• Wing loading: 60,5 gr/dm²
  
• Airfoil: HN-203
  
• Scale: 1:4

Controls:

• Elevator
  
• Rudder
  
• Ailerons
  
• Flaps
• Airbrakes

Wings and tailplane:

• High strength gel-coat carbon wings in shell design
  
• Clean, high quality processing
  
• Various carbon inlays at high stressed points
  
• Carbon D-Bx
• Painted in the mould
  

Fuselage:

• High strength gelcoat carbon fuselage
  
• Clean, high quality processing
  
• Multiple non-stop carbon inserts ⭐
  
• Various carbon inlays at high stressed points ⭐
  
• Painted in the mould
• Clean Canopy

Accessories included:

• Glass canopy
• Glass servo covers Servo support plate (fuselage)
  
• 4x servo frames (wings)
  
• Glass control horns ⭐
  
• High quality clevis made of spring steel ⭐
  
• Pre-assembled and encapsulated wiring harness ⭐
  

Further recommended accessories:

• Fitting servo set (available here in the shop) ⭐
  
• Magnetic switch (available here in the shop) ⭐
  

Servo recommendation:

• Elevator: KST X10
• Rudder: KST DS725MG
• Aileron: 2x KST X10
  
• Flaps: 2x KST X10
  
• Airbrakes: 2x KST X10
• Note our low-priced servo sets in the accessories area! ⭐
  

Rudder setup:

• Elevator: 9 mm up/down
  
• Rudder: 30 mm left/right
  
• Aileron: 13 mm up, 6 mm down
• Flaps: 3 mm up, 4 mm down

(All mm data measured at the position of the largest deflection of the rudder)

Information about motorization:

• Motor: Hacker A30-12 XL-Glider kv700
• Controller: Hacker Speed Controller X-55-SB-Pro
• Battery: Hacker TopFuel LiPo 20C ECO-X 3000mAh 4S MTAG
• Propeller: Aeronaut 13 x 8 ACC

Ballasting recommendation:

• Wind > 10 km/h: 460 [gr.]
  
• Wind > 13 km/h: 610 [gr.]
  
• Wind > 16 km/h: 770 [gr.]
  
• Wind > 20 km/h: 920 [gr.]
  
• Wind > 23 km/h: 1070 [gr.]
  
• Wind > 25 km/h: 1230 [gr.]
  
• Wind > 28 km/h: 1380 [gr.]
  
• Wind > 31 km/h: 1540 [gr.]
  

Assembling Manual:

• Assembling Manual Diana-2
  

Referencen/Videos:

• Diana-2 Fun at the slope
• Diana-2 Soaring Impressions
• Diana-2 Power Turbine
• Diana-2-Bungee
  

More Ressources:

• Composite RC Gliders Knowledge Base
  
• CRG Youtube Channel
• Instagram
• Newsletter

✉ info@composite-rc-gliders.com

☎ +49 2405 4067752 (german / english)

Whatsapp: +49 152 31700200 (german / english)