DG-600 neo Race 3.3 m
from 949.00 €
Description
Please first select the exact variant above to see the exact price.
DG-600 neo Race 3.3 m
- Fully assembled (ARF) or ready to fly (RTF)
- Seat shell and instrument panel in marble look
- Ready wiring harness for fuselage and wings
- Two wing tips possible: Classic and Winglets
- Winglets available as an accessory
- Square carbon wing joiner
- Optimised layup
- Additionally 2x24k carbon rovings in the leading edge
- All highly stressed areas additionally reinforced with CFRP
- High durability and lifetime
- Simple protective bags included
References:
- DG-600-neo-Race Test Flusgsport-Magazin
- DG-600-neo-Race vom Test in der Flugmodel (Video)
- DG-600-neo-Race Test in Flugmodell (Print)
- DG-600-neo-Race 3.3m - Maximum fun in Slovenia
- DG-600 neo -3.3m - Just Two Minutes Of Fun
- DG-600-neo-Race 3.3m - Harsh wind conditions
- DG-600 neo Race - 3.3m - Rene has Fun
- DG-600 neo Race - 3.3.m - Video from Manfred Dittmeyer
- DG-600 neo Race 3.3m - Test Flights for Flugmodell Magazine - Denmark
- DG-600 neo Race 3.3m - Test in DMFV Modellflieger Magazine (German)
The DG-600 neo Race was created based on the current Neo series.
It convinces with excellent all-round properties that convince both full-composite beginners and old hands.
Whether calm and precise in the thermals or fully ballasted and agile in a storm, the DG-600 neo Race always cuts a fine figure and offers maximum flying fun.
The solid wing construction is uncompromisingly suitable for all common aerobatic manoeuvres.
Thanks to the 4-flap wing, the DG can be braked excellently with butterfly and always lands smoothly and precisely.
The pack size is only 1.65 m.
Version:
- Glider
- Electro (FES) with scale spinner and white propeller
- Impeller (EDF)
Build:
- Standard Kit: All standard parts incl. wiring harness
- Full Build Kit (Glider): Standard kit + servo set, battery and magnetic switch
- Full Build Kit (Electro): Standard kit + servo set, impeller, controller and motor-battery
- Full Build Kit (Impeller): Standard Kit + servo set + mechanical retraction+ EDF + controller + battery
- Ready To Fly: Full Build Kit + complete assembly of the aircraft by us within a few days!
- Premium Read To Fly: Full Build Kit + complete assembly of the aircraft by us within a few days! + high quality bags for all parts
Classification:
- Easy to build..........⭐⭐⭐⭐⭐
- Easy to set up........⭐⭐⭐⭐
- Easy to fly...............⭐⭐⭐⭐
- Speed..................... ⭐⭐⭐⭐⭐
- Thermal................. ⭐⭐⭐⭐
- Agility..................... ⭐⭐⭐⭐
- Strength.................⭐⭐⭐⭐
Technical data:
- Wingspan: 3.330 mm (130") (Winglets)
- Wingspan: 3.380 mm (133") (Wingtips)
- Wing area: 48 dm²
- Center of gravity: 60 mm (Thermal)
- Center of gravity: 64 mm (Race) With CRG Race Wedge or at the elevator front underlay 1.3mm
- Flight weight: from 2.200 gr
- Scale: 1:5
- Airfoil: HQ 2.5/11
Controls:
- Elevator
- Rudder
- Ailerons
- Flaps
- Tow release (opt.)
Wings and tailplane:
- High strength gel-coat carbon wings in sandwich build
- Clean, high quality processing
- White/red/blue painted in the mould
Fuselage:
- High strength gelcoat glass/carbon fuselage
- Clean, high quality processing
- Painted in the mould
- Clean Canopy
- Canopy frame
Accessories included:
- Glass canopy
- Glass servo covers Servo support plate (fuselage)
- High quality clevis made of spring steel ⭐
- Pre-assembled and encapsulated wiring harness ⭐
Further recommended accessories:
- Fitting servo set (available here in the shop) ⭐
- Magnetic switch (available here in the shop) ⭐
Servo recommendation:
- Elevator: KST X12
- Rudder: KST X12
- Aileron: 2x KST X10 mini
- Flaps: 2x KST X10
- Note our low-priced servo sets in the accessories area! ⭐
Rudder Setup:
- Elevator: 9 mm up / down
- Rudder: 18 mm left / right
- Aileron: 8 mm up, 5 mm down
- Flaps: 12 mm down, 2 mm up
Butterfly/Landing:
- Ailerons: 3mm up
- Flaps: Full down
(All mm data measured at the position of the largest deflection of the rudder)
Information about motorization:
- Motor: A20-6XL 10-Pole + 4,4:1
- Controller: PowerBEAST C60 Basic
- Battery: Hacker TopFuel LiPo 3000mAh 4S
- Propeller: Scale CFK white 14 x 8
- Spinner: Scale Spinner CFK white 30 mm
Impeller:
- JETEC E-80 Impeller 6-8S
- Motor: Leomotion 1900kv
- Controller: Hacker MasterSPIN 160 Pro BEC
- Battery: Hacker TopFuel LiPo 35C Power-X 5000mAh 6S MTAG
Building description:
More Ressources:
✉ info@composite-rc-gliders.com
☎ +49 2405 4067752 (german / english)
Whatsapp: +49 152 31700200 (german / english)