DG-1001 3,6 m

from 1,499.00 €

Delivery time: 3 day(s)


Please choose first the "Version" and the "Build" to see the price. Then you'll be able to put your product into the basket.


The DG-1001 is a further development of the DG-1000, which has been offered by DG Flugzeugbau since 2000. The original two-seater spans 20 m and is valued worldwide as a reliable training aircraft.

With a scale of 1: 5.55, our DG-1001 has a wingspan of 3.6 m and, like the original, can also be equipped with an electric motor or impeller (in the original jet engine).

The DG-1001 follows the principle of "keep it simple". Thus, like the original, our model has ailerons and spoilers.

The landing gear and the landing gear flaps are already installed and the canopy is glued and painted. The kit also includes a cockpit expansion set, which offers a very nice basis for scale enthusiasts.

The take-off weight in the electric version is less than 5 kg, which makes the model usable on every slope. In addition to its very good flight performance, the model impresses with its grandiose look, which is in no way inferior to the original.

The pack size is only 1.8 m.


  • Glider
  • Electro (FES)
  • Impeller (EDF)


  • Standard Kit: All standard parts incl. wiring harness
  • Full Build Kit (Glider): Standard kit + servo set, battery and magnetic switch
  • Full Build Kit (Electro): Standard kit + servo set, impeller, controller and motor-battery
  • Full Build Kit (Impeller): Standard Kit + servo set + mechanical retraction+ EDF + controller + battery
  • Read To Fly: Full Build Kit + complete assembly of the aircraft by us within a few days!


  • Easy to build..........⭐⭐⭐⭐
  • Easy to set up........⭐⭐⭐⭐
  • Easy to fly..............⭐⭐⭐⭐⭐
  • Speed.................... ⭐⭐⭐
  • Thermal................. ⭐⭐⭐⭐⭐
  • Agility..................... ⭐⭐

Technical data:

  • Wingspan: 3.600 mm
  • Wing area: 59,4 dm²
  • Center of gravity: 55 mm
  • Flight weight: 4.700 g
  • Scale: 1:5,55
  • Airfoil: HQ


  • Elevator
  • Rudder
  • 2x Ailerons
  • 2x Airbrakes
  • retractable landing gear

Wings and tailplane:

  • High strength gel-coat carbon hardshell wings
  • Clean, high quality processing
  • Painted in the mould


  • High strength gelcoat glass/carbon/aramid fuselage
  • Clean, high quality processing
  • Painted in the mould
  • Clean Canopy

Accessories included:

  • Installed landing gear
  • Glass canopy (glued and painted)
  • Glass servo covers Servo support plate (fuselage)
  • High quality clevis made of spring steel ⭐
  • Pre-assembled and encapsulated wiring harness ⭐

Further recommended accessories:

  • Fitting servo set (available here in the shop) ⭐
  • Magnetic switch (available here in the shop) ⭐

Servo recommendation:

  • Elevator: KST x10mini
  • Rudder: KST x10mini
  • Aileron: 2x KST x10
  • Airbrakes: 2x KST x10 mini
  • Landing gear: KST x10
  • Note our low-priced servo sets in the accessories area! ⭐

Rudder Setup:

  • Elevator: 8 mm up / down
  • Rudder: 20 mm left / right
  • Aileron: 10 mm up, 6 mm down

(All mm data measured at the position of the largest deflection of the rudder)

Information about motorization:

  • Motor: Hacker A30
  • Controller: Hacker Speed Controller X-55-SB-Pro
  • Battery: Hacker TopFuel LiPo 20C ECO-X 2400mAh 3S MTAG
  • Propeller: GM Propeller Scale Folding Propeller 16x8
  • Spinner: GM Propeller Scale Spinner


  • 70mm Impeller/EDF
  • Motor: Hacker E40
  • Controller: 150A
  • Battery: 6s 5000mah

Questions? info@composite-rc-gliders.com