ASW-27 4 m

from 1,999.00 €

incl. VAT, plus delivery
Delivery time: 7 day(s)

Description


Please choose first the "Version" and the "Build" to see the price on your choice . Then you'll be able to put your product into the basket.


ASW-27

  • Worldwide shipping
  • Tripple Carbon wings
  • Hard Shell wings
  • Large aramid-reinforced fuselage
  • Chassis included and fully installed
  • Cockpit glued and painted including cockpit lock
  • Ready wiring harness for fuselage and wings


The ASW 27 has been offered by Alexander Schleicher GmbH & Co. since 1995. The W in the name comes from the designer Gerhard Waibel. As a high-performance glider of the 15m class, this type of aircraft can be found at competitions around the world.


With a scale of 1: 3.75, our ASW 27 has a span of 4 m. Like the original, our model is not only equipped with ailerons but also with flaps and spoilers. The HQ profile track ensures very good all-round properties and makes flying this model an absolute delight.


The wings are made in a high-strength carbon hard shell layup, which ensures stability and durability. The landing gear and the landing gear doors are already installed. The canopy is glued and painted.


The pack size is only 1.95m


Video:


Version:

  • Glider
  • Electro (FES) with scale spinner and white propeller
  • Impeller (EDF)


Build:

  • Standard Kit: All standard parts incl. wiring harness
  • Full Build Kit (Glider): Standard kit + servo set, battery and magnetic switch
  • Full Build Kit (Electro): Standard kit + servo set, spinner, propeller, motor, if necessary, a gearbox, controller and motor-battery
  • Full Build Kit (Impeller): Standard Kit + servo set + mechanical retraction+ EDF + controller + battery
  • Read To Fly: Full Build Kit + complete assembly of the aircraft by us within a few days!
  • Read To Fly Premium:
    • Complete assembly of the aircraft by us within a few days!
    • High quality bags for all parts from Revoc
    • Aluminium Case


Classification:

  • Easy to build..........⭐⭐⭐⭐
  • Easy to set up........⭐⭐⭐⭐⭐
  • Easy to fly..............⭐⭐⭐⭐⭐
  • Speed.................... ⭐⭐⭐
  • Thermal................. ⭐⭐⭐⭐⭐
  • Agility..................... ⭐⭐⭐


Technical data:

  • Wingspan: 4.000 mm
  • Wing area: 74,5 dm²
  • Center of gravity: 76 mm
  • Flight weight: 6.400 gr.
  • Airfoil: HQ
  • Scale: 1:3,75


Controls:

  • Elevator
  • Rudder
  • Ailerons
  • Flaps
  • Airbrakes
  • Landing Gear


Wings and tailplane:

  • High strength gel-coat carbon wings in hardshell design
  • Clean, high quality processing
  • Painted in the mould


Fuselage:

  • High strength gelcoat glass/aramid fuselage
  • Clean, high quality processing
  • Painted in the mould
  • Clean Canopy


Accessories included:

  • Glass canopy
  • Glass servo covers Servo support plate (fuselage)
  • Glass control horns ⭐
  • High quality clevis made of spring steel ⭐
  • Pre-assembled and encapsulated wiring harness ⭐


Further recommended accessories:

  • Fitting servo set (available here in the shop) ⭐
  • Magnetic switch (available here in the shop) ⭐


Servo recommendation:

  • Elevator: KST X12
  • Rudder: KST DS725MG
  • Aileron: 2x KST X10
  • Flaps: 2x KST X10
  • Airbrakes: 2x KST X10mini
  • Landing gear: KST BLS 651
  • Note our low-priced servo sets in the accessories area! ⭐


Rudder setup:

  • Elevator: 9 mm up/down
  • Rudder: 25mm left/right
  • Aileron: 10 mm up, 6 mm down
  • Flaps: 3 mm up, 20mm down


(All mm data measured at the position of the largest deflection of the rudder)


Information about motorization:

  • Motor: Hacker A40-10L V4 14-Pole kv500
  • Controller: PowerBEAST C80 Basic
  • Battery: Hacker TopFuel LiPo 20C ECO-X 3000mAh 4S MTAG
  • Propeller: GM Scale Folding Propeller 17x10
  • Spinner: GM Propeller Scale Spinner


Impeller:

  • MigFlight JETEC E-80 Impeller 6-8S
  • Motor: Leomotion 1900kv
  • Controller: Hacker MasterSPIN 160 Pro BEC
  • Battery: Hacker TF Power-X 5000-6S MTAG


Manual:



Fragen? info@composite-rc-gliders.com