Alpenbrise 4.0 m

from 1,999.00 €

incl. VAT, plus delivery
Delivery time: 40 day(s)

Description


Please first select the exact variant above to see the exact price.


Alpenbrise 4.0 m

  • Aerodynamically optimized for two end points:
    • All flaps neutral: GPS sport for cross-country and optimal energy retention
    • All flaps 1mm down: Thermal- and Slow flight and landing
  • All-up weight under 5 kg (also electric version)
  • Full carbon wing (Sport) or double carbon (Super Sport)
  • Full carbon fuse. Fuselage nose GRP / aramid
  • Fully assembled (ARF) or ready to fly (RTF)
  • Finished wiring harness for fuselage and wings
  • Four-flap wing Ballast option in the wing and fuselage
  • Sinusoidal carbone spar for maximum strength and rigidity
  • Control horns glued in place
  • Damped tailplane
  • Profile thickness 8% and 9%


References:



The Alpenbrise was designed as a really good looking, compact all-round glider with a state-of-the-art design. The stiff, light construction gives the Alpenbrise all freedom and it will rise in the lightest thermals, while with ballast it has excellent energy storage and aerobatic properties.


With its very own cry on fast passes, as the eddies are thrown off at the wing tips, the alpine breeze has a real presence when flying. As part of the original designs, the Alpenbrise is also great for the Triangle GPS class.


The extremely solid construction prepares the alpine breeze for continuous use over decades!


With the recommended motorization, with a weight of less than 5 kg and a thrust of almost 8 kg, you can always easily go out of your hand or from the starter car. But she also cuts a fine figure while towing.


Even when flown extremely slowly, it is always easy to control (anti tip stall design)


Servos for the elevator and vertical stabilizer are located in the back of the fuselage. This ensures extremely short and play-free linkages.


The pack size is only 1.95 m.




Version:

  • Glider
  • Electro (FES) with scale spinner and white propeller


Build:

  • Standard Kit: All standard parts incl. wiring harness
  • Full Build Kit (Glider): Standard kit + servo set, battery and magnetic switch
  • Full Build Kit (Electro): Standard kit + servo set, impeller, controller and motor-battery
  • Ready To Fly: Full Build Kit + complete assembly of the aircraft by us within a few days!
  • Premium Read To Fly: Full Build Kit + complete assembly of the aircraft by us within a few days! + high quality bags for all parts


Classification:

  • Easy to build..........⭐⭐⭐⭐
  • Easy to set up........⭐⭐⭐⭐
  • Easy to fly...............⭐⭐⭐⭐
  • Speed..................... ⭐⭐⭐
  • Thermal................. ⭐⭐⭐⭐⭐
  • Agility..................... ⭐⭐⭐
  • Strength.................⭐⭐⭐⭐⭐


Technical data:

  • Wingspan: 4.000 mm (157”)
  • Wing area: 76,3 dm² (1,182 Sq.”)
  • Center of gravity: 104-108 mm
  • Flight weight glider: 4900 gr.
  • Flight weight e-glider: 4900 gr.
  • Airfoil: JH35-9 - JH35-8 (high response type)


Controls:

  • Elevator
  • Rudder
  • Ailerons
  • Flaps


Wings and tailplane:

  • High strength gel-coat carbon wings in sandwich build
  • Clean, high quality processing
  • Painted in the mould


Fuselage:

  • High strength gelcoat glass/carbon/aramid fuselage
  • Clean, high quality processing
  • Painted in the mould


Accessories included:

  • Glass servo covers Servo support plate (fuselage)
  • High quality clevis made of spring steel ⭐
  • Pre-assembled and encapsulated wiring harness ⭐


Further recommended accessories:

  • Fitting servo set (available here in the shop) ⭐
  • Magnetic switch (available here in the shop) ⭐


Servo recommendation:

  • Elevator: KST X10mini
  • Rudder:KST X10mini
  • Aileron: KST X10
  • Flaps: KST X10
  • Note our low-priced servo sets in the accessories area! ⭐


Rudder Setup:

  • Elevator: 10 mm up / down
  • Rudder: 20 mm left / right
  • Aileron: 12 mm up, 8 mm down
  • Flaps: 2 mm down, 2 mm up


Butterfly/Landing:

  • Ailerons: 10 mm up
  • Flaps: 75 degree down
  • Elevator mix: 70% down
  • (All mm data measured at the position of the largest deflection of the rudder)


Information about motorization:

  • Motor: Hacker A40-10S V2 8-Pole kv1600 + 6,7:1 PG
  • Controller: Hacker Speed Controller X-70-SB-Pro 2..6S
  • Battery: Hacker TopFuel LiPo 20C ECO-X 3000mAh 6S MTAG
  • Propeller: Scale Folding Propeller 22x14
  • Spinner: 38 mm Scale Spinner


Building description:


More Ressources:



info@composite-rc-gliders.com

☎ +49 2405 4067752 (german / english)

Whatsapp: +49 152 31700200 (german / english)